Our Services

 

Radiographic Testing (RT)

Is used extensively on castings, weldments,  and concrete reinforcement locations for drilling processes.  This method is suitable for ferrous and non-ferrous materials.  Our inspection services include IR 192, cobalt 60 and cathode ray tube inspections on site and in the field.

 

Ultrasonic Testing (UT)

Ultrasonic flaw Inspection will detect defects located in the weld zone and base material, these include detecting cracks, interior corrosion, and other base material flaws. With this process, it is possible to produce a baseline to generate a monitoring system.

 

Magnetic Particle Testing

This process is used to detect small indications either at or near the surface, this is typically used to locate cracking or lack of fusion in a weldment on material less than 5/16” thick or interpasses.  This process can also utilize fluorescent particles to enhance sensitivity.

Liquid Penetrant Testing (PT)

This inspection process is utilized to locate indications only open to the surface, it can be used on both ferrous and non-ferrous material.  This process also utilizes both visible and fluorescent dye material to optimize visual detection and/or sensitivity.

Visual Testing (VT)

Verified according to the standards of the American Welding Society Certified Welding Inspectors (AWS CWI), a complete inspection will be conducted to locate defects such as cracks and leaks as well as broken, topped out or bottom out hangers.

API & ASME Inspection

This inspection process is used to inspect storage tanks, piping and pressure vessels and pressure piping for initial and intermediate inspection. These processes are utilized to determine life expectancy.

R

Subcontracting and project staffing services.

R

Nondestructive (NDT) Level 2 services

R

Ultrasonic testing both Shear and Thickness (UT)

R

Magnetic Particle, Visible and Florescent Methods (MT)

R

Dye Penetrant testing Visible and Florescent Methods (PT)

R

Per AWS, ICC, AISC, ASME, API, ASME, ABS, DSA, OSHPD and NACE.

R

Radiography

R

Level 3 Consulting and 3rd Party witness services

R

Visual Inspection (VT) / Certified Weld Inspection (CWI)

R

Shop and Field observations, audits, and NDT testing

R

Level 3 Consulting Services in UT, MT, PT, RT and VT certification and procedure review.

R

In house Quality control training and establishment of in-place quality control programs
and procedures.

R

Destructive testing, Full service Lab, to include; Tensile, Guided Bend, Fillet Weld Break, Nick Break Hardness,and Micro-etch testing.

R

International Code Council (ICC) specifications for Structural Steel welding and bolting, to include Seismic specific requirements.

R

New and pre-existing construction building inspections to include AWS, AISC, ASME, API 510, 653

R

Coatings and Surface preparation inspections per SSPC with NACE Level I,II

R

Radiation Safety Officer Services (RSO)

R

Subcontracting and project staffing services.

R

Nondestructive (NDT) Level 2 services in:

o Ultrasonic testing both Shear and Thickness (UT) (AWS, ASME, Mil and other)

o Radiography, gamma IR 192, Cobalt 60 and X-ray cathode ray tube (RT), Digital and Traditional Film

o Visual Inspection (VT) / Certified Weld Inspection (CWI)

o Magnetic Particle Inspection, Visible and Florescent Methods (MT)

o Liquid Dye Penetrant Testing, Visible and Florescent Methods (PT)

R

Full Geo Technical Engineering laboratory services including:

o Preliminary Environmental Site Assessments including drilling / Transaction Screens

o Pavement thickness Design and Highway / Runway Geotechnical designs

o Earth Dam Design, seepage Analysis and Feasibility investigations, expert witness testimony.

o Bridge Foundations Explorations, deep foundation design, retaining systems, excavation design

If you would like to join our team apply here